KwikLok Packs
100% Recycled PVC Interlocking Floor Tiles
- Easy DIY installation.
- Popular low-cost flooring for inside the house or office, playrooms, and garages.
- No adhesive required.
- Made from 100% recycled PVC.
- Non-conductive and fire-resistant.
- Please note: This product may discolour and warp if laid in areas exposed to direct sunlight.
- Do not expose to direct sunlight or extreme temperatures.
- Edging available on special order.
- Samples are available on request for pre-qualified leads and resellers only.
- Our interlocking tile range should only be used on floor applications, if these tiles were to be used on walls or any other application, please consult an adhesive specialist to ensure that the correct adhesive is used for your installation. Always consult your Sales Account Manager to ensure this product can be installed on your specific site for the application you require.
*Product should not be installed exposed to direct sunlight or excessive heat/cold from workshop machinery heat, as PVC has a tendency to react, contract, or expand, in such environments. In the case that this cannot be avoided, we recommend the application of glue to the surface however, this may not guarantee that the product will experience some movement. In such events/applications, we will not accept returns on the product.
- Parts
- Downloads
- Installation Guides
Parts | ||||
| Part NumberRUBKLR6 | Size465 mm x 30 mm x 6 mm | ColourBlack | Weight | Price Request Request Price |
| Part NumberRUBKL64 | Size465 mm x 465 mm | ColourBlack | Weight1.4 | Price Request Request Price |
How to Install Interlocking Rubber Mats?
Interlocking Rubber Mats can be laid on damaged or cracked subfloor surfaces. For best results, it is advised to install on a level and clean floor.
- Sweep the existing floor to ensure that the surface is clean and free of dust and dirt.
- We advise that our interlocking rubber mats are laid in areas that have an ambient temperature between 16°C-24°C
- We recommend using a self-leveling repair compound in areas where there are variations in subfloor surfaces. If not addressed, floor tiles may ‘dislocate’ at the connection interlocks
- Relative humidity in the room should not be more than 60% (ideal 30% to 60%).
It’s very important to leave approximately 5mm expansion gap between the tiles and any walls/fixed points for expansion. Sometimes for larger areas, a bigger gap may be required.
